Square Wooden Foot 70mm x 70mm x 200mm Natural

Square Wooden Foot 70mm x 70mm x 200mm

The Square Wooden Foot 70mm x 70mm x 200mm is a tall European Beech hardwood furniture leg for sofas, armchairs, cabinets, benches and other furniture requiring a straight-sided wooden support.

Its 70mm x 70mm square profile provides a solid appearance, while the 200mm height gives considerably more ground clearance than the shorter square feet within the range.

a M8 threaded fitting allows the foot to screw into a compatible furniture fixing, making it suitable for new furniture manufacture as well as replacement and refurbishment projects.

Available in Black, Mahogany, Natural, Oak, Raw and Wenge, the foot can be selected to complement a wide range of furniture styles and upholstery.

For alternative dimensions, browse Square Wooden Feet.

Square Wooden Foot Specification

• Width: 70mm
• Depth: 70mm
• Height: 200mm
• Timber: European Beech hardwood
• Style: tall square furniture leg
• Fixing: M8 threaded fitting
• Available finishes: Black, Mahogany, Natural, Oak, Raw and Wenge
• Base: fitted with metal glide
• Suitable for: sofas, chairs, benches, cabinets and other furniture

The 200mm height makes this model particularly suitable where a clearly visible wooden leg and increased floor clearance are required.

200mm High Wooden Furniture Leg

At approximately 20cm high, this is a substantially taller furniture support than the 70mm and 120mm square-foot options.

The additional height can suit:

• Sofas and settees
• Armchairs
• Upholstered chairs
• Benches
• Cabinets
• Storage furniture
• Occasional furniture
• Bespoke furniture
• Furniture refurbishment
• Replacement furniture legs
• New furniture manufacture

The increased height also makes the wooden leg a much more prominent part of the finished furniture.

For the wider selection of timber furniture supports, browse Wooden Furniture Feet & Legs.

Straight-Sided 70mm Square Profile

The 70mm x 70mm section gives the leg a straight-sided appearance.

This simple square profile can work particularly well with furniture that uses clean lines and where a curved or turned leg would be too decorative.

Choose this style where:

• A tall square wooden leg is required
• A 200mm height suits the furniture
• Straight lines complement the furniture design
• The leg will remain clearly visible
• A 70mm square section is preferred

M8 Threaded Furniture Leg

The Square Wooden Foot uses a M8 threaded fitting for attachment to a compatible furniture frame.

Where the furniture already has a M8 threaded insert, the leg can simply be screwed into place.

Before ordering, check:

• Existing thread size
• Condition of the threaded fixing
• Furniture-frame construction
• Available mounting area
• Required finished furniture height
• Number of legs required

Do not force a M8 threaded leg into an incompatible fixing.

Where a suitable timber frame requires a new M8 anchor point, M8 T Nuts provide an internal M8 thread for wooden or metal furniture legs.

M8 D Nuts provide another threaded fixing option for suitable furniture-frame applications.

Replacing Existing Furniture Legs

The 200mm Square Wooden Foot can be used where existing furniture legs are damaged, missing or being changed as part of a refurbishment.

Before fitting replacement legs:

1. Support the furniture safely.
2. Remove one existing leg where possible.
3. Measure its width, depth and height.
4. Check the existing thread size.
5. Inspect the furniture-frame fixing.
6. Compare the replacement height.
7. Confirm the required finish.
8. Check that the completed furniture remains level.

Particular care should be taken when replacing substantially shorter furniture feet because a 200mm leg will noticeably alter the overall furniture height.

If you're unsure whether this leg is suitable, contact us before ordering.

Choosing the Correct Finish

The Square Wooden Foot is available in six finishes.

Black

The Black finish provides a strong, clean appearance suited to furniture and darker upholstery.

Mahogany

The Mahogany finish provides a darker traditional appearance suited to classic furniture and richer timber tones.

Natural

The Natural finish provides a lighter wooden appearance where the timber is intended to remain clearly visible.

Oak

The Oak option works particularly well with furniture and interiors using lighter oak-style tones.

Raw

The Raw version is supplied unfinished, allowing the European Beech hardwood to be stained, painted or otherwise finished specifically for the furniture project.

Wenge

The Wenge finish provides a very dark wood-style appearance suited to modern furniture and strongly contrasting upholstery.

Raw European Beech for Bespoke Finishing

The Raw option provides additional flexibility for bespoke furniture and restoration projects.

Depending on the required appearance, the timber can be:

• Stained
• Painted
• Sealed
• Lacquered
• Polished

Browse Woodcare, Stains & Lacquers for suitable furniture-finishing products.

Before applying a finish:

• Make sure the timber is clean and dry
• Sand where required
• Remove sanding dust
• Test the chosen finish on a small area
• Follow the manufacturer's application instructions
• Allow the finish to dry fully before fitting

Metal Glide Fitted to the Base

The foot is supplied with a metal glide fitted to the base.

Where furniture will sit on wooden or laminate flooring, the metal glide can be removed and replaced with suitable felt protection.

Self-Adhesive Felt Pads can provide a softer contact surface where correctly fitted.

Always check that any replacement floor protector sits securely beneath the leg and does not affect furniture stability.

200mm or 120mm Square Wooden Foot?

The Square Wooden Foot 70mm x 70mm x 120mm uses the same basic square dimensions but provides considerably less height.

Choose the 200mm version where:

• A tall wooden furniture leg is required
• Greater floor clearance is needed
• The leg is intended to be a prominent visual feature
• The furniture proportions suit a 200mm support

Choose the 120mm version where:

• A medium-height square foot is more appropriate
• Less ground clearance is required
• A 200mm leg would make the furniture too tall

Looking for a Compact Square Foot?

For furniture requiring a much lower support, see the Square Wooden Foot 65mm x 65mm x 70mm.

The compact 70mm version is better suited where the furniture needs to remain relatively close to the floor.

The 200mm model should be chosen where height and visible leg length are important parts of the finished design.

Looking for a Broader Wooden Foot?

The Square Wooden Foot 95mm x 95mm x 90mm provides a much broader footprint with a lower overall height.

Choose the 95mm x 95mm x 90mm foot where a wide, base is more important than additional height.

Choose the 70mm x 70mm x 200mm foot where a tall, slender square profile is preferred.

Square Leg or Curved Wooden Foot?

For a shaped alternative, consider the Curved Wooden Foot 44mm x 80mm x 120mm.

Choose the Square Wooden Foot where:

• Straight clean lines are preferred
• A tall 200mm wooden leg is required
• The leg needs a square profile
• A simple or traditional shape suits the furniture

Choose the Curved Wooden Foot where a shorter, shaped profile better complements the furniture.

Protecting the Furniture Base

A washer can be useful with some threaded furniture-leg installations.

The Plastic 50mm Serrated Washer can help separate the top of the wooden leg from the underside covering where compatible with the furniture construction.

Always make sure the M8 thread engages securely after any washer or additional component is fitted.

Check Before Ordering

Before ordering, check:

• 70mm x 70mm square profile
• 200mm height
• M8 threaded fitting
• Existing furniture-leg dimensions
• Required finished furniture height
• Furniture-frame construction
• Condition of the existing fixing
• Number of legs required
• Required finish
• Floor surface

Where replacing an existing leg, remove and measure one original where possible.

Pay particular attention to the 200mm height, as changing from a substantially shorter leg can alter seat height, cabinet height and the overall proportions of the furniture.

If you're uncertain about compatibility, contact us before placing your order.

Square Wooden Furniture Legs for Trade & Furniture Repair

The Square Wooden Foot 70mm x 70mm x 200mm is suitable for professional upholsterers, furniture makers, repair workshops and domestic furniture projects requiring a tall European Beech furniture leg with a M8 threaded fitting.

For alternative dimensions, browse Square Wooden Feet.

For other timber furniture legs and feet, browse Wooden Furniture Feet & Legs.

Tall Square Wooden Foot 70mm x 70mm x 200mm, manufactured from European Beech hardwood for sofas, chairs, cabinets and upholstered furniture requiring a straight-sided wooden leg.

• Size: 70mm x 70mm x 200mm
• Timber: European Beech hardwood
• Style: tall square wooden furniture foot
• Fixing: M8 threaded fitting
• Finish options: Black, Mahogany, Natural, Oak, Raw or Wenge
• Base: fitted with metal glide

Important: Check the 200mm height and confirm that your furniture has a compatible M8 fixing before ordering. Changing from a shorter furniture foot to this 200mm version will significantly increase the finished furniture height.