Fibre filled bolster cushions 8” diameter x 30” long

Fibre Filled Bolster Cushions for Upholstery and Soft Furnishings

Fibre Filled Bolster Cushions are soft, lightweight cylindrical cushion interiors suitable for sofas, chairs, beds, upholstery projects and decorative soft furnishings.

Manufactured in-house, each bolster uses virgin 15 denier conjugate hi-loft fibre filling enclosed within a Corovin casing to create a soft, well-filled cushion with a comfortable and plump appearance.

Because these bolsters are manufactured by Status Fabrics, we can also produce bespoke sizes where one of the standard options is unsuitable.

see the Bolster & Scatter Cushions range for alternative cushion shapes and fillings.

Soft, Feather-Free Fibre Filling

The hi-loft fibre filling gives the bolster a soft and plump feel without the use of feather.

This makes fibre bolsters a practical option for customers looking for:

• A lightweight cushion interior
• A soft and comfortable finish
• A feather-free filling
• Decorative support cushions
• Replacement bolster interiors
• Upholstery and soft furnishing applications

Unlike solid foam, fibre creates a softer and less structured cushion which can be dressed and shaped within the cover.

Suitable Uses

Fibre filled bolster cushions can be used for:

• Sofa and chair bolsters
• Lumbar support
• Arm support
• Bed dressing
• Day beds
• Decorative cushions
• Traditional upholstery
• Loose cushion arrangements
• Furniture restoration
• Window seat accessories
• Soft furnishing projects
• Domestic and commercial upholstery

The cylindrical shape makes bolsters especially useful where additional support or a decorative rounded cushion is required.

Standard Bolster Cushion Sizes

The current standard range includes:

• 4" diameter x 20" long
• 5" diameter x 20" long
• 5" diameter x 24" long
• 6" diameter x 20" long
• 6" diameter x 24" long
• 6" diameter x 30" long
• 7" diameter x 20" long
• 7" diameter x 24" long
• 7" diameter x 30" long
• 8" diameter x 20" long
• 8" diameter x 24" long
• 8" diameter x 30" long
• 9" diameter x 24" long
• 9" diameter x 30" long
• 10" diameter x 24" long
• 10" diameter x 30" long

Bespoke Fibre Filled Bolster Cushions

Because the bolster cushions are manufactured in-house, bespoke sizes can also be produced for upholstery, furniture restoration and soft furnishing projects.

This is particularly useful when replacing an existing cushion interior where the original bolster does not match a standard size.

For help with a non-standard diameter or length or if you'd prefer a feather filling contact us with the required measurements.

Choosing the Correct Bolster Size

When replacing an existing bolster cushion, measure both:

• The finished diameter
• The finished length

If measuring an existing cushion cover rather than the old filling, bear in mind that soft fibre interiors need sufficient fullness to properly fill the cover.

A bolster that is too small may leave the cover loose or under-filled, while excessive filling can distort the shape and place unnecessary strain on seams and zips.

If you are unsure, contact us before ordering.

Fibre Bolsters vs Foam Bolsters

Fibre and foam bolsters give very different results.

A fibre filled bolster is softer, lighter and easier to shape. It is well suited to decorative cushions, beds, sofas and situations where a relaxed, comfortable finish is wanted.

A solid foam bolster provides greater firmness and more defined shape retention.

For applications where firmer support is required, Status Fabrics can also supply Foam Cut to Size for suitable upholstery projects.

Caring for Fibre Filled Bolster Cushions

Fibre is a soft filling and will naturally settle during use.

Regularly turn, roll and plump the bolster to help redistribute the filling and maintain an even, full appearance.

This is normal maintenance for soft fibre cushion interiors and does not indicate a fault.

Bolsters may also become compressed during transit. Once unpacked, reshape and plump the cushion thoroughly to allow the fibre to recover.

Suitable for Domestic and Trade Customers

Fibre filled bolster cushions are suitable for homeowners, upholsterers, furniture manufacturers, furniture restorers, interior designers and soft furnishing businesses.

The in-house manufacture also makes them particularly useful for trade customers who require repeat sizes or bespoke bolster cushion interiors.

Soft fibre filled bolster cushions manufactured in-house using virgin 15 denier conjugate hi-loft fibre enclosed in a Corovin casing. Use it for sofas, chairs, beds, upholstery and decorative soft furnishings.

• Soft, lightweight and feather-free
• Manufactured in-house by Status Fabrics
• Virgin 15 denier conjugate hi-loft fibre filling
• Corovin outer casing
• Wide choice of standard diameters and lengths
• Bespoke sizes available on request
• Suitable for domestic and trade upholstery