6mm Scrim Foam 54″ Wide

6mm Scrim Foam for Automotive Upholstery and Trimming

This 6mm scrim foam is a 54" wide foam backing and padding material for automotive trimming, upholstery, quilting, stitched panels and general finishing work.

A thin scrim is laminated to one side of the foam. This backing helps stabilise the material during handling and helps protect the foam from tearing when it is sewn.

At 6mm thick, it provides noticeably more padding and body than 3mm scrim foam while remaining flexible enough for many seat, panel and upholstery applications.

The foam can be sewn or glued and is particularly useful behind fabric, leather, vinyl and leatherette.

Product Specification

• Thickness: 6mm
• Width: 54"
• Construction: Foam with scrim laminated to one side
• Purchase options: Per metre, per roll or per 40m roll
• Application: Automotive trimming, upholstery, quilting and panel work
• Suitable for: Sewing or bonding
• Foam colour: May vary

What Is 6mm Scrim Foam Used For?

6mm scrim-backed foam is used where more padding is required than a thin 3mm backing, but where a deep or heavily cushioned appearance is not wanted.

Common applications include:

• Car seats
• Vehicle door cards
• Automotive trim panels
• Seat centre panels
• Seat bolsters
• Headrests
• Parcel shelves
• Campervan interior panels
• Motorhome trim
• Quilted upholstery
• Diamond stitching
• Fluted panels
• Channelled upholstery
• Leather backing
• Vinyl backing
• Fabric backing
• Furniture panels
• Decorative upholstered panels

The 6mm foam layer creates additional softness and depth while the scrim helps support the material during sewing and fitting.

6mm Scrim Foam for Car Seats

6mm automotive scrim foam is particularly useful behind car seat covering materials where a noticeable but controlled padded effect is required.

It can be used beneath:

• Automotive fabric
• Leather
• Vinyl
• Leatherette
• Faux suede

Compared with 3mm foam, the extra thickness creates greater body beneath the covering and can produce a more pronounced stitched or quilted finish.

This makes it useful for:

• Seat centre sections
• Bolster panels
• Headrests
• Decorative inserts
• Quilted seat sections

For vehicle covering materials, browse Automotive & Headlining Fabrics.

6mm Scrim Foam for Door Cards and Trim Panels

Door cards and interior trim panels often benefit from a layer of foam beneath the finishing material.

6mm scrim foam provides enough depth to create a visibly padded surface while remaining manageable around most panel edges and trim details.

Typical applications include:

• Door cards
• Side panels
• Interior trim boards
• Campervan panels
• Motorhome panels
• Parcel shelves
• Decorative automotive inserts

For removing and refitting vehicle trim, browse specialist Car Trimming Tools.

Scrim Foam for Quilting and Decorative Stitching

One of the key applications for scrim-backed foam is quilted and stitched upholstery.

The scrim laminated to the foam helps stabilise the material during sewing and reduces the risk of the foam tearing as stitches pass through it.

6mm thickness works particularly well where the stitching itself should create visible depth without producing an excessively raised finish.

Common styles include:

• Diamond quilting
• Horizontal channels
• Vertical fluting
• Parallel stitching
• Decorative seat panels
• Leather quilting
• Vinyl quilting
• Fabric quilting

The combination of foam depth and stitch spacing will determine the final appearance.

6mm Foam Behind Leather

Using 6mm scrim foam behind leather can create a softer and more upholstered finish.

It is useful where leather panels need:

• Additional body
• Controlled padding
• Quilted detail
• Decorative stitching
• A softer surface feel

For flatter leather work with less depth, 3mm may be more suitable.

For deeper quilting and more pronounced relief, consider 8mm, 10mm or thicker scrim foam.

6mm Foam Behind Vinyl and Leatherette

Vinyl and leatherette can also be backed with 6mm scrim foam to produce a more padded appearance.

This is useful for:

• Automotive trim
• Seat panels
• Door cards
• Furniture panels
• Decorative inserts

The scrim backing also makes the foam easier to manage when sewing layered upholstery assemblies.

6mm Foam Behind Upholstery Fabric

Upholstery fabric can be combined with scrim foam when extra softness and body are required.

The 6mm thickness is useful for projects where plain fabric over a hard panel would otherwise look too flat or thin.

Applications can include:

• Furniture panels
• Chair backs
• Decorative wall panels
• Bed panels
• Headboards
• Vehicle trim
• Quilted furniture sections

3mm or 6mm Scrim Foam?

For thinner padding, choose 3mm Scrim Foam 60" Wide.

Choose 3mm scrim foam when you need:

• Minimal bulk
• Light surface padding
• Thin door cards
• Subtle stitched effects
• Light fabric or vinyl backing

Choose 6mm scrim foam when you need:

• Greater softness
• More noticeable padding
• Deeper quilting
• More body beneath leather or vinyl
• A fuller automotive trim finish

The 6mm product is the logical next step where 3mm feels too thin.

6mm or 8mm Scrim Foam?

For a stronger padded effect, consider 8mm Scrim Foam 60" Wide.

Choose 6mm where moderate padding and flexibility are priorities.

Choose 8mm where the foam needs to contribute more visibly to the shape and depth of the finished panel.

Typical 8mm applications include deeper quilting, more pronounced seat panels and padded trim sections.

6mm or 10mm Scrim Foam?

10mm Scrim Foam 60" Wide creates an even deeper padded finish.

Choose 6mm for general automotive upholstery, door cards, moderate quilting and flexible panel work.

Choose 10mm where:

• Strong padding depth is required
• Quilting needs greater relief
• A fuller upholstered surface is wanted
• The panel design can accommodate additional thickness

Need Even Deeper Scrim Foam?

For upholstery projects requiring substantially more depth, There is also 12mm Scrim Foam 60" Wide.

The thicker foam is particularly useful where padding depth becomes a major part of the finished design rather than simply acting as a backing layer.

see the Scrim Foam range to compare available thicknesses.

6mm Scrim Foam for Campervans and Motorhomes

6mm scrim foam is also useful for vehicle conversion and leisure-vehicle interior work.

Potential applications include:

• Campervan side panels
• Door cards
• Storage panels
• Roof-side trim
• Motorhome panels
• Caravan interiors
• Decorative wall sections
• Seating panels

The additional padding can help create a softer and more finished interior surface without the bulk associated with much thicker foam.

Bonding 6mm Scrim Foam

Scrim foam can be bonded as well as sewn.

The correct adhesive should be selected according to:

• Foam type
• Covering material
• Substrate
• Location
• Operating temperature

Vehicle interiors can experience high temperatures, particularly around roof and window areas.

For suitable automotive trimming applications, use Trimbond High Temperature Spray Adhesive.

Before bonding:

• Remove deteriorated foam and old loose adhesive
• Clean and prepare the substrate
• Test adhesive compatibility on an offcut
• Apply adhesive evenly
• Avoid over-saturating the foam
• Follow the recommended tack time
• Position the material carefully
• Apply even pressure
• Follow the adhesive manufacturer's curing instructions

Cutting and Shaping 6mm Scrim Foam

6mm scrim foam can be cut using suitable sharp upholstery tools.

For cleaner results:

• Measure accurately
• Mark the required panel
• Use a sharp knife or cutting tool
• Cut on a suitable work surface
• Avoid stretching the material
• Test-fit before sewing or bonding

Browse Knives & Foam Cutters for suitable upholstery cutting equipment.

For vehicle-specific fitting and trim-removal equipment, browse Car Trimming Tools.

Scrim Foam for Professional Car Trimmers

6mm scrim foam is particularly useful for professional automotive trimmers because it can perform several roles from one workshop material.

It can be used for:

• Seat padding
• Door-card backing
• Decorative panels
• Quilting
• Leather backing
• Vinyl backing
• Campervan trim
• Custom interior work

Status Fabrics' Car Trimming Tools range includes specialist equipment for vehicle upholstery and trim work, helping customers source both the padding material and the tools required for installation.

Scrim Foam Is Not Main Seat Support Foam

6mm scrim foam is a backing, surface-padding and finishing material.

It should not be confused with the main upholstery foam used to provide structural seat support.

It is not intended to replace supportive foam in:

• Sofa seat cushions
• Chair seat cushions
• Bench cushions
• Mattress cores
• Main vehicle seat foam structures

For supportive bespoke upholstery foam, use Foam Cut to Size.

6mm Scrim Foam for Upholsterers and Automotive Trimmers

The combination of 6mm thickness, 54" width and scrim backing makes this a useful general-purpose material for automotive trimmers, upholsterers, furniture makers, campervan converters and professional workrooms.

It provides more padding than thin 3mm foam while retaining enough flexibility for seat panels, door cards, quilting, decorative upholstery and many vehicle interior applications.

Browse Scrim Foam for alternative thicknesses.

For vehicle fabrics and coverings, browse Automotive & Headlining Fabrics.

For specialist vehicle upholstery equipment, browse Car Trimming Tools.

For suitable high-temperature automotive adhesive applications, choose Trimbond High Temperature Spray Adhesive.

For help choosing the correct scrim foam thickness for your upholstery or automotive trimming project, contact us.

6mm scrim-backed foam for automotive upholstery, car seats, door cards, trim panels, quilting and general padded upholstery work.

• 6mm foam thickness
• 54" wide
• Thin scrim laminated to one side
• Scrim backing helps protect the foam when sewn
• Suitable for sewing or gluing
• Use it for car seats, door cards and automotive trim panels
• for quilting and stitched leather, vinyl or fabric
• Provides more padding than 3mm scrim foam without excessive bulk
• Available per metre, per roll or per 40m roll
• Foam colour may vary

The 6mm thickness provides a useful middle ground between lightweight 3mm backing foam and the deeper padded effect of 8mm, 10mm and thicker scrim foams.

see the Scrim Foam range to compare alternative thicknesses.

For automotive projects, browse Automotive & Headlining Fabrics and specialist Car Trimming Tools.

For suitable heat-exposed automotive trimming applications, consider Trimbond High Temperature Spray Adhesive.