Square Wooden Foot 95mm x 95mm x 90mm

Square Wooden Foot 95mm x 95mm x 90mm

The Square Wooden Foot 95mm x 95mm x 90mm is a broad European Beech hardwood furniture foot for sofas, armchairs, cabinets and other furniture requiring a square wooden support.

With a 95mm x 95mm footprint and 90mm height, this model provides a wider, heavier visual profile than the narrower square feet in the range while keeping the furniture relatively close to the floor.

The foot uses a M8 threaded fitting, making it suitable for furniture fitted with a compatible threaded insert.

Available in Black, Mahogany, Natural, Oak, Raw and Wenge, it can be selected to complement a wide range of traditional and furniture.

For alternative sizes and profiles, browse Square Wooden Feet.

Square Wooden Foot Specification

• Width: 95mm
• Depth: 95mm
• Height: 90mm
• Timber: European Beech hardwood
• Style: broad square furniture foot
• Fixing: M8 threaded fitting
• Available finishes: Black, Mahogany, Natural, Oak, Raw and Wenge
• Suitable for: sofas, armchairs, chairs, cabinets and other furniture

The combination of a 95mm square footprint and 90mm height makes this foot particularly suitable where a wooden base is preferred without using a tall furniture leg.

Broad Square Wooden Furniture Foot

The larger 95mm x 95mm footprint gives this foot a noticeably more appearance than narrower furniture feet.

Typical applications include:

• Sofas and settees
• Armchairs
• Upholstered chairs
• Footstools
• Benches
• Cabinets
• Storage furniture
• Occasional furniture
• Furniture refurbishment
• Replacement furniture feet
• New furniture manufacture

For the wider selection of timber supports, browse Wooden Furniture Feet & Legs.

90mm High Wooden Furniture Foot

At 90mm high, this foot provides more clearance than the compact 70mm square foot while remaining considerably lower than the 120mm and 200mm alternatives.

The proportions work particularly well where:

• A broad furniture foot is required
• A lower overall height is preferred
• A wooden support suits the furniture
• The foot needs to remain visible
• A tall furniture leg would look out of proportion

Always compare the replacement dimensions with the existing furniture feet before ordering.

M8 Threaded Furniture Foot

The foot uses a M8 threaded fitting for attachment to a compatible furniture frame.

Where furniture already has a M8 threaded insert, the replacement foot can be screwed directly into the fitting.

Before ordering, check:

• Existing thread size
• Condition of the threaded insert
• Furniture-frame construction
• Available mounting area
• Required furniture height
• Number of feet required

Do not force a M8 threaded foot into an incompatible fixing.

Where a new threaded fixing is required in a suitable timber frame, M8 T Nuts provide a M8 connection.

M8 D Nuts provide another M8 fixing option for suitable furniture applications.

Replacement Wooden Feet for Sofas & Chairs

The Square Wooden Foot can be used when existing furniture feet are damaged, missing, worn or being replaced during refurbishment.

Before fitting replacement feet:

1. Support the furniture safely.
2. Remove one existing foot where possible.
3. Measure its width, depth and height.
4. Check the existing thread size.
5. Inspect the furniture-frame fixing.
6. Compare the replacement dimensions.
7. Confirm the required finish.
8. Check that the furniture remains level after fitting.

The broad 95mm footprint should be checked carefully to ensure there is sufficient space beneath the furniture frame.

If you're unsure whether the foot is suitable, contact us before ordering.

Choosing the Correct Finish

The Square Wooden Foot is available in six finish options.

Black

The Black finish provides a clean dark appearance suited to furniture, dark upholstery and contrasting interior schemes.

Mahogany

The Mahogany finish provides a traditional darker wood appearance that works well with classic upholstered furniture.

Natural

The Natural finish provides a lighter timber appearance where a straightforward wooden look is preferred.

Oak

The Oak finish complements lighter wood tones and furniture designed to coordinate with oak-style interiors.

Raw

The Raw option is supplied unfinished, allowing the European Beech hardwood to be stained, painted or otherwise finished specifically for the project.

Wenge

The Wenge finish provides a very dark wood-style appearance suited to furniture and stronger colour contrasts.

Raw European Beech for Bespoke Finishing

The Raw option is particularly useful for restoration and bespoke furniture projects where the visible timber needs to match an existing finish.

Depending on the required appearance, the timber can be:

• Stained
• Painted
• Sealed
• Lacquered
• Polished

Browse Woodcare, Stains & Lacquers for suitable furniture-finishing products.

Before applying a finish:

• Make sure the timber is clean and dry
• Sand where required
• Remove sanding dust
• Test the chosen finish on a small area
• Follow the manufacturer's application instructions
• Allow the finish to dry thoroughly before fitting

95mm Square Foot or Compact 65mm Foot?

For furniture requiring a smaller wooden support, see the Square Wooden Foot 65mm x 65mm x 70mm.

Choose the 95mm x 95mm x 90mm foot where:

• A broad furniture support is preferred
• A visual base suits the furniture
• A 90mm height is appropriate
• A 65mm foot would appear too small

Choose the 65mm x 65mm x 70mm foot where a more compact and small support is required.

95mm Foot or 120mm Square Foot?

The Square Wooden Foot 70mm x 70mm x 120mm provides a narrower but taller alternative.

Choose the 95mm x 95mm x 90mm foot where:

• A wider footprint is preferred
• A lower 90mm height suits the furniture
• A heavier visual profile is required

Choose the 70mm x 70mm x 120mm foot where:

• More floor clearance is required
• A narrower square section is preferred
• The additional 30mm of height better suits the furniture

Looking for a Tall Square Furniture Leg?

For substantially greater height, see the Square Wooden Foot 70mm x 70mm x 200mm.

The 200mm version provides a much taller and more prominent leg profile.

Choose the 95mm x 95mm x 90mm foot where a broad low-to-medium-height support is required.

Choose the 70mm x 70mm x 200mm version where height and floor clearance are the priority.

Square Foot or Curved Wooden Foot?

For a shaped alternative, see the Curved Wooden Foot 44mm x 80mm x 120mm.

Choose the Square Wooden Foot where:

• A broad straight-sided profile is preferred
• A 95mm x 95mm footprint suits the furniture
• A block-style appearance is required
• A 90mm height is suitable

Choose the Curved Wooden Foot where a narrower, taller and more shaped furniture leg better complements the design.

Protecting Hard Floors

Where wooden furniture feet sit on timber, laminate or other vulnerable hard flooring, suitable felt protection can help reduce scratching and marking.

Self-Adhesive Felt Pads can be used where the size and shape of the foot provide a suitable clean contact surface.

Check periodically that floor protectors remain secure and replace them when worn.

Protecting the Furniture Base

A suitable washer can help separate a threaded wooden furniture foot from the underside covering on some furniture constructions.

The Plastic 50mm Serrated Washer can be used with suitable furniture-leg installations.

Always make sure the M8 thread engages securely after any washer or additional fixing component is fitted.

Check Before Ordering

Before ordering, check:

• 95mm x 95mm footprint
• 90mm height
• M8 threaded fitting
• Existing furniture-foot dimensions
• Available mounting area
• Required finished furniture height
• Furniture-frame construction
• Condition of the existing fixing
• Number of feet required
• Required finish
• Floor surface

Where replacing an existing furniture foot, remove and measure one original where possible.

Pay particular attention to the 95mm square footprint, as the furniture frame needs sufficient mounting area for the foot to sit correctly.

If you're uncertain about compatibility, contact us before placing your order.

Square Wooden Furniture Feet for Trade & Furniture Repair

The Square Wooden Foot 95mm x 95mm x 90mm is suitable for professional upholsterers, furniture manufacturers, repair workshops, cabinet makers and domestic furniture projects requiring a broad wooden furniture support.

For alternative dimensions, browse Square Wooden Feet.

For other timber furniture legs and feet, browse Wooden Furniture Feet & Legs.

For compatible furniture-leg fixings, browse T Nuts, D Nuts & Fixings.

Broad-profile Square Wooden Foot 95mm x 95mm x 90mm, manufactured from European Beech hardwood for sofas, armchairs, cabinets and upholstered furniture requiring a wooden support.

• Size: 95mm x 95mm x 90mm
• Timber: European Beech hardwood
• Style: broad square wooden furniture foot
• Fixing: M8 threaded fitting
• Finish options: Black, Mahogany, Natural, Oak, Raw or Wenge
• Suitable for: sofas, chairs, cabinets and furniture repairs

Important: Check the 95mm x 95mm footprint, 90mm height and M8 fixing before ordering to ensure the foot is suitable for your furniture.