Shaped Wooden Bun Foot 125mm diameter x 80mm

Shaped Wooden Bun Foot 125mm Diameter x 80mm

The Shaped Wooden Bun Foot 125mm Diameter x 80mm is a broad European Beech hardwood furniture foot made for sofas, armchairs, footstools, cabinets and other furniture where a rounded wooden support is required.

With a 125mm diameter and 80mm height, the foot creates a wider and more prominent appearance than the smaller bun feet in the range while keeping the furniture relatively close to the floor.

Its shaped profile gives it more decorative character than a plain round foot without the taller proportions of a turned furniture leg.

a M8 threaded fitting allows the foot to screw into a compatible furniture fixing.

Available in Black, Mahogany, Natural, Oak, Raw and Wenge, it can be selected to complement a wide range of furniture finishes and upholstery styles.

For alternative sizes and profiles, browse Round Wooden Feet.

Shaped Wooden Bun Foot Specification

• Diameter: 125mm
• Height: 80mm
• Timber: European Beech hardwood
• Style: shaped wooden bun foot
• Fixing: M8 threaded fitting
• Available finishes: Black, Mahogany, Natural, Oak, Raw and Wenge
• Base: fitted with metal glide
• Suitable for: sofas, armchairs, footstools, cabinets and other furniture

The combination of a 125mm diameter and 80mm height gives this foot a broad appearance without raising the furniture excessively from the floor.

Broad Wooden Bun Foot for Sofas & Armchairs

The 125mm diameter makes this one of the broader round furniture feet in the range.

It is particularly suitable for:

• Sofas and settees
• Armchairs
• Upholstered chairs
• Footstools
• Benches
• Cabinets
• Storage furniture
• Occasional furniture
• Furniture refurbishment
• Replacement furniture feet
• New furniture manufacture

The broad rounded profile can work particularly well beneath larger upholstered furniture where a smaller bun foot may appear undersized.

For the wider selection of timber furniture supports, browse Wooden Furniture Feet & Legs.

80mm High Furniture Foot

At 80mm high, the foot provides moderate ground clearance while maintaining the lower appearance traditionally associated with a bun-style furniture foot.

This makes it useful where:

• A broad furniture foot is preferred
• The furniture needs to remain relatively low
• A decorative round profile suits the design
• A tall furniture leg would look out of proportion
• A visible timber support is required

Always compare the replacement height with the existing furniture feet before ordering.

Shaped Bun Foot or Plain Bun Foot?

Traditional bun feet tend to have a simpler rounded profile, while this shaped version provides greater visual detail.

Choose the Shaped Wooden Bun Foot 125mm x 80mm where:

• A wide 125mm furniture foot is required
• A more decorative profile is preferred
• The furniture needs a wooden base
• An 80mm height suits the furniture
• The foot will remain clearly visible

For a smaller and simpler alternative, consider the Wooden Bun Foot 87mm Diameter x 54mm.

The smaller bun foot is better suited where a more compact furniture support is required.

Shaped Bun Foot or Turned Shaped Bun Foot?

For a similar decorative style with different proportions, the Turned Shaped Bun Foot 120mm Diameter x 90mm Tall provides an alternative.

Choose the 125mm x 80mm Shaped Bun Foot where:

• A broader 125mm diameter is preferred
• A lower 80mm profile suits the furniture
• A rounded base is required

Choose the 120mm x 90mm Turned Shaped Bun Foot where:

• Slightly more height is required
• A turned profile better suits the furniture
• A more detailed decorative shape is preferred

Looking for a Taller Decorative Foot?

For additional height, consider the Turned Shaped Bun Foot 110mm Diameter x 130mm Tall.

Its 130mm height creates a more prominent furniture support and provides considerably more ground clearance.

Choose the 125mm x 80mm bun foot where a wide, lower-profile support is preferred.

Choose the taller turned version where additional height and a more pronounced decorative profile are required.

M8 Threaded Furniture Foot

The foot is fitted with a M8 thread for use with compatible furniture fixings.

Where the furniture already has a suitable M8 threaded insert, the foot can be screwed directly into place.

Before ordering, check:

• Existing thread size
• Condition of the threaded fixing
• Available mounting area
• Furniture-frame construction
• Required furniture height
• Number of feet required

Do not force a M8 threaded foot into a fixing of a different size.

Where a new threaded fixing is required in a suitable timber frame, M8 T Nuts or M8 D Nuts provide compatible M8 fixing options.

Replacing Existing Furniture Feet

The Shaped Wooden Bun Foot can be used where existing furniture feet are damaged, missing or being changed as part of a refurbishment.

Before fitting replacements:

1. Support the furniture safely.
2. Remove one original foot where possible.
3. Measure its diameter and height.
4. Check the existing thread size.
5. Inspect the furniture-frame fixing.
6. Compare the replacement dimensions.
7. Confirm the required finish.
8. Check the completed furniture sits level.

Pay particular attention to the 125mm diameter, as the furniture frame needs enough clear space to accommodate the broad top of the foot.

If you're unsure whether the foot is suitable, contact us before ordering.

Choosing the Correct Finish

The Shaped Wooden Bun Foot is available in six finishes.

Black

The Black finish provides a clean dark appearance that works well with upholstery and darker furniture.

Mahogany

The Mahogany finish provides a richer traditional appearance suited to classic sofas, armchairs and darker timber schemes.

Natural

The Natural finish provides a lighter timber appearance where the character of the wooden foot is intended to remain visible.

Oak

The Oak finish works particularly well alongside lighter furniture and oak-style interior finishes.

Raw

The Raw option is supplied unfinished, allowing the European Beech to be stained, painted or otherwise finished specifically for the furniture project.

Wenge

The Wenge finish provides a very dark wood-style appearance suited to furniture and stronger contrasts with upholstery.

Raw European Beech for Bespoke Finishing

The Raw option provides additional flexibility for furniture restoration and bespoke furniture manufacture.

Depending on the required appearance, the timber can be:

• Stained
• Painted
• Sealed
• Lacquered
• Polished

Browse Woodcare, Stains & Lacquers for suitable furniture-finishing products.

Before applying a finish:

• Make sure the timber is clean and dry
• Sand where required
• Remove sanding dust
• Test the chosen finish on a small area
• Follow the manufacturer's application instructions
• Allow the finish to dry fully before fitting

Metal Glide Fitted to the Base

The foot is supplied with a metal glide fitted to the base.

Where the furniture will sit on wooden or laminate flooring, the metal glide can be removed and replaced with suitable felt protection.

Self-Adhesive Felt Pads can provide a softer contact surface where correctly fitted.

Check periodically that any floor protector remains secure and replace it when worn.

Bun Foot or Turned Wooden Foot?

For a taller, narrower and more traditionally turned profile, consider the Turned Wooden Foot 90mm Diameter x 125mm.

Choose the Shaped Wooden Bun Foot where:

• A broad 125mm diameter is preferred
• A lower 80mm height suits the furniture
• A rounded base is required
• A bun-style appearance complements the design

Choose the turned foot where:

• More height is needed
• A narrower profile suits the furniture
• The turned shape is intended to remain a prominent feature

For another turned option with a broader profile, see the Turned Wooden Foot 100mm Diameter x 102mm.

Bun Foot or Tapered Wooden Leg?

For furniture requiring considerably more height and a slimmer appearance, the Round Tapered Wooden Leg 40mm Diameter x 150mm Tall and Round Tapered Wooden Leg 45mm Diameter x 200mm Tall provide alternative styles.

A tapered leg is better suited where:

• Greater floor clearance is required
• A slimmer furniture leg is preferred
• A lighter, more raised appearance suits the furniture

The Shaped Wooden Bun Foot is better suited where:

• Furniture should remain closer to the floor
• A broad rounded support is preferred
• A traditional furniture foot suits the design

Check Before Ordering

Before ordering, check:

• 125mm diameter
• 80mm height
• M8 threaded fitting
• Existing furniture-foot dimensions
• Available mounting area
• Required finished furniture height
• Furniture-frame construction
• Condition of the existing fixing
• Number of feet required
• Required finish
• Floor surface

Where replacing an existing foot, remove and measure one original wherever possible.

If you're uncertain about compatibility, contact us before placing your order.

Shaped Wooden Bun Feet for Trade & Furniture Repair

The Shaped Wooden Bun Foot 125mm Diameter x 80mm is suitable for professional upholsterers, furniture manufacturers, repair workshops, cabinet makers and domestic projects requiring a broad decorative European Beech furniture foot.

For alternative bun feet, turned feet and tapered legs, browse Round Wooden Feet.

For the wider selection of furniture supports, browse Wooden Furniture Feet & Legs.

WooCommerce Upsells

Shaped Wooden Bun Foot 125mm Diameter x 80mm, manufactured from European Beech hardwood for sofas, armchairs, footstools, cabinets and other furniture requiring a broad decorative wooden foot.

• Diameter: 125mm
• Height: 80mm
• Timber: European Beech hardwood
• Style: shaped wooden bun foot
• Fixing: M8 threaded fitting
• Finish options: Black, Mahogany, Natural, Oak, Raw or Wenge
• Base: fitted with metal glide

Important: Check the 125mm diameter, 80mm height and M8 fixing before ordering. The wide footprint requires sufficient clearance beneath the furniture frame.