Foam Backed Suede Trim

SuedeTrim Foam Backed Faux Suede Headlining Fabric

SuedeTrim is a soft-touch, foam backed faux suede fabric made for automotive headlining, campervan conversions and decorative vehicle interior trimming.

It has a suede-effect surface laminated to approximately 3mm scrim foam. This specialist automotive trimming fabric offers a lightly cushioned finish suitable for covering compatible roof boards, door cards and interior panels.

The foam backing provides additional softness and helps the covering follow gentle curves and contours, making SuedeTrim a practical alternative to conventional vehicle headlining cloth or carpet lining.

Supplied 150cm wide and sold by the linear metre, SuedeTrim is available in seven colours through this single product listing.

Select your preferred colour from the variations above to view the corresponding photograph.

Product Specifications

• Product range: SuedeTrim
• Material: Faux suede-effect upholstery fabric
• Backing: Laminated scrim foam
• Foam thickness: Approximately 3mm
• Fabric width: 150cm (approximately 59")
• Surface: Soft-touch suede-effect finish
• Available colours: Seven
• Supply: Sold by the linear metre
• Applications: Car headlinings, campervan interiors, door cards and decorative vehicle panels

The material is intended for suitable interior trimming applications. Its suitability for a particular vehicle component depends on the substrate, fixing method and operating conditions.

Seven SuedeTrim Colours

Choose from seven shades to complement contemporary, traditional and customised vehicle interiors.

• Beige, a warm neutral for light-coloured headlinings and campervan interiors.
• Black, a popular option for dark automotive interiors and customised roof linings.
• Brown, a warm, traditional shade suited to classic vehicles and campervan conversions.
• Butter, a light cream tone for brighter interior colour schemes.
• Charcoal, a darker grey for modern, understated vehicle trimming.
• Grey, a neutral for roof linings and interior panels.
• Red, a distinctive accent colour for custom automotive interior projects.

The suede-effect surface has a directional nap, which can influence the apparent colour depending on lighting and viewing angle.

When cutting several panels, maintain a consistent pile direction to achieve a coordinated appearance.

Screen colours may vary from the actual fabric. Physical samples are recommended where an exact match is important.

Foam Backed Suede for Car Headlining

One of the principal uses for SuedeTrim is replacing worn, sagging or deteriorated vehicle roof lining.

Many original automotive headlinings are manufactured using a decorative fabric bonded to thin foam. Over time, the foam can break down, causing the covering to separate from the roof board.

SuedeTrim's integrated 3mm scrim foam backing makes it a suitable replacement covering for compatible headlining boards once the original deteriorated materials have been removed.

The soft suede-effect surface creates a refined appearance and can change the appearance of an ageing vehicle interior.

For headlining installation, consider Trimbond High Temperature Spray Adhesive, subject to testing compatibility with the fabric and substrate.

Vehicle interiors can experience high temperatures, so choosing the correct adhesive is particularly important.

Campervan and Motorhome Interior Lining

Foam backed suede is also a popular decorative material for campervan and motorhome conversions.

It provides a softer finish than conventional carpet lining and can be used to create a coordinated appearance across suitable interior panels.

Typical applications include:

• Campervan roof lining
• Motorhome ceiling panels
• Decorative wall panels
• Rear-door and side-door inserts
• Interior storage panels
• Window surrounds
• Bed-board coverings
• Custom conversion trim

The 150cm width is useful for covering larger areas while reducing unnecessary fabric joins.

For additional vehicle upholstery materials, browse Status Fabrics' Automotive & Headlining Fabrics collection.

Faux Suede for Door Cards and Interior Panels

SuedeTrim can also be used to recover suitable automotive door cards and decorative interior trim panels.

Its flexible foam backing creates a lightly padded appearance, while the suede-effect surface adds texture and visual interest.

The material may be used for suitable trim inserts, parcel shelves, interior panels and decorative vehicle features.

Before recovering panels, inspect the original substrate and repair any damaged backing boards.

Avoid fitting material over airbag deployment areas, safety equipment, ventilation openings or other safety-critical components unless the installation has been specifically approved for that vehicle.

Choosing the Correct Automotive Headlining Material

SuedeTrim is a useful choice where a soft-touch suede appearance and integrated foam backing are required.

For traditional vehicle roof linings, PVC Perforated Headlining provides an alternative finish.

For padded vehicle seating and compatible interior upholstery, consider SF11 Foam Backed Black Seating Fabric.

Foam backed suede should not automatically be substituted for specialist vehicle seat upholstery or safety-critical interior components without checking its intended performance.

Measuring, Cutting and Fitting SuedeTrim

Measure the complete panel before ordering, including sufficient extra fabric for wrapping edges, curves and trimming.

For shaped roof boards, allow additional material around recesses, sunroof openings and mounting points.

Remove the existing headlining fabric, deteriorated foam and loose adhesive residue before applying a replacement covering.

Use a suitable adhesive specifically intended for the materials being bonded and the temperatures expected within the vehicle.

Test the adhesive on a small offcut before completing the installation. Excessive adhesive may penetrate or damage the foam backing.

For removing original vehicle trim, browse Car Trimming Tools.

Suitable Upholstery Shears & Snips can be used to cut the material accurately.

Cleaning and Maintaining Faux Suede

Regularly remove loose dust using a soft upholstery brush or suitable vacuum attachment.

For minor marks, use a cleaning method compatible with the faux suede surface, testing first on an inconspicuous area.

Avoid excessive moisture, aggressive cleaning chemicals and harsh scrubbing that may damage the fabric or foam backing.

Brushing the pile consistently can help maintain an even appearance across adjoining panels.

SuedeTrim is a soft-touch faux suede fabric with approximately 3mm foam backing, used for car headlinings, campervan conversions, door cards and decorative interior panels.

Available in seven colours, it provides a smooth, lightly cushioned suede-effect finish.

Width: 150cm | Foam backing: 3mm | Sold by the metre

Choose a colour to see its image. Colours may vary due to screen resolutions and settings. Samples available on request.